WiFi-Antennas

Wordwide Suppliers of High Grade Antenna's for Wireless Networks...

 

1000mw Power over Ethernet Booster


The 1000MW-G-POE is a unique approach to the RF Power Amplifier. This unit is designed to function as an amplifier as well as transferring data over the same CAT-5 line that carries the DC power supply. This flexibility allows the 1000MW-G-POE to be mounted in a very tight space.

This module uses the Time Division Duplex (TDD) technology designed for high power 2.4GHz ISM band.  The applications in this band include WLAN, Bluetooth, Point to Point (P2P), and Point to Multi-Point (P2MP) systems.  The Booster Module enhances the coverage and stabilizes the transmitted data rate of Direct Sequence Spread Spectrum (DSSS) in both indoor and outdoor applications, such as 802.11b, 802.11b+, 802.11g and 802.11b+g.

For Tx, we use a proprietary high-power, high-efficiency, linear amplifier MMIC which is manufactured on an advanced Gallium Arsenide Heterojunction Bipolar Transistor (HBT) to get low current consumption and better heat effect. In WLAN applications, it produces a continuous RF output power of 1000mW (+30 dBm) under the 802.11b spectral mask.

Technical Specification


Applications
WLAN 802.11b & b+  
WLAN 802.11g & 802.11b+g  
DSSS on the ISM Band  
Bluetooth  

Absolute Maximum Ratings
Supply voltage 72V
Rx Input power   -10 dBm
Tx Input power +23 dBm
Operating Temperature -0 ~ +50 °C
Storage Temperature -40 ~ +90 °C
Frequency Band 2.4 ~ 2.5 GHz
Signal Type OFDM & DSSS
TR Switch Time < 1μsec
Rx Max. Input Power -10 dBm
Rx Power Gain 20 dB Max
Tx Input Power +5 dBm ~ +20 dBm
Tx Linear output Power 1000 mW / 30 dBm max.
Tx Power Gain 12 dB (default)
Diagnosis LED PWR@Green, Tx@Red, Rx@Yellow
DC Supply Voltage 48V DC
Operating Temperature -0 ~ +50 °C

Additional Images


1000mw POE Booster
1000mw BoosterDC Injector
Kit

 
 
 
 
Images & Content © Allendale Electronics Limited.
E&OE - Specificatios subject to change without prior notice.